I created the ultimate custom onahole!
Posted: 2015 Jul 25, 13:00
After being really disapointed by the 1mm Virgin, I planned to do something with it in order to not have wasted my money.
The main problem was that the material is way too soft and there is no tightness due to the lack of sleeve. I work in a machine shop so I cut a 5" leight of 2 3/8" X 2 1/8" steel pipe. I grinded all sharp edges and I gave it two coats of anti-rust paint, inside and outside. The main body of the Virgin is a 2" X 2 1/2" square so it's a really tight fit and it's hard to put inside. Once I manage it, it's a sleeved onahole.
Yeah, I could ideally used plastic or aluminum, but I used what I had on hand. It make for a HEAVY onahole, but it's still plenty usable. Here's the result. (forgive the dirtyness, lint and other shits just stuck in the soft material).

Just lubing my whole dick plenty is enough to guarantee a nice and confortable penetration. It did work well enough and gave way more feeling than the sleevless version. I came, but it wasnt mind-blowing.
Next day, I step up my game. I remove the Virgin from the pipe (pretty easy removal for cleaning) and turn her inside-out. The virgin is pretty easy to reverse for cleaning at least. Anyway, I took a pair of scisors and made many random slices in the "flesh". The Virgin have very thick walls so there's plenty to cut. I was careful not to cut through and I did not remove any material. It did give a VERY interesting texture. Have a look of the results. Here's the 1mm Virgin inside-out, with the "scisor slices upgrade":

So, I did as I did yesterday. Put the onahole in the steel sleeve, look at hot H-Manga, lube dick, and start playing.
Daaaaaaaaaaaamn.... It was incredible! It was pleasurable all the way through and I have a very intence orgasm!
So, one onahole saved!
The main problem was that the material is way too soft and there is no tightness due to the lack of sleeve. I work in a machine shop so I cut a 5" leight of 2 3/8" X 2 1/8" steel pipe. I grinded all sharp edges and I gave it two coats of anti-rust paint, inside and outside. The main body of the Virgin is a 2" X 2 1/2" square so it's a really tight fit and it's hard to put inside. Once I manage it, it's a sleeved onahole.
Yeah, I could ideally used plastic or aluminum, but I used what I had on hand. It make for a HEAVY onahole, but it's still plenty usable. Here's the result. (forgive the dirtyness, lint and other shits just stuck in the soft material).

Just lubing my whole dick plenty is enough to guarantee a nice and confortable penetration. It did work well enough and gave way more feeling than the sleevless version. I came, but it wasnt mind-blowing.
Next day, I step up my game. I remove the Virgin from the pipe (pretty easy removal for cleaning) and turn her inside-out. The virgin is pretty easy to reverse for cleaning at least. Anyway, I took a pair of scisors and made many random slices in the "flesh". The Virgin have very thick walls so there's plenty to cut. I was careful not to cut through and I did not remove any material. It did give a VERY interesting texture. Have a look of the results. Here's the 1mm Virgin inside-out, with the "scisor slices upgrade":

So, I did as I did yesterday. Put the onahole in the steel sleeve, look at hot H-Manga, lube dick, and start playing.



Daaaaaaaaaaaamn.... It was incredible! It was pleasurable all the way through and I have a very intence orgasm!
So, one onahole saved!